Sti 9105 Bedienungsanleitung PDF herunterladen

Safety Technology International, Inc.

2306 Airport Road • Waterford, Michigan 48327-1209

hone: 248-673-9898 • Fax: 248-673-1246

oll Free: 800-888-4784 • E-mail: [email protected]

Web: www.sti-usa.com

afety Technology International (Europe) Ltd.

Unit 49G Pipers Road • Park Farm Industrial Estate • Redditch

Worcestershire • B98 0HU • England • Tel: 44 (0) 1527 520 999

ax: 44 (0) 1527 501 999 • Freephone: 0800 085 1678 (UK only)

-mail: [email protected]om • Web: www.sti-europe.com

INSTALLATION OF STI-9105 & STI-9105-S THERMOSTAT COVER

All specifications and information shown were current as of publication, and are subject to change without notice.

9105 NOV2005

CLEANING INSTRUCTIONS

To clean cover, remove from wall. Rinse with water to remove abrasive dust and

dirt. Wash with soap or mild detergent using a soft cloth (DO NOT SCRUB). Rinse

once more, then dry with a soft cloth or chamois. To remove grease or wet paint,

rub gently with a cloth wetted thoroughly with naphtha. Then wash and rinse.

DO NOT USE RAZOR BLADES.

INSTALLATION INSTRUCTIONS

1. Do not remove thermostat. Prior to drilling anchor holes, cover thermostat with a

damp cloth to prevent dust from penetrating the sensor.

2. Center frame over existing thermostat. Mark and drill (4) anchor holes using a 1/4

in. (6.3mm) drill bit. Insert the (4) anchors and complete installation as shown.

NOTE: The (3) tabs on the frame must face upward (View A).

3. Insert the (3) slots on the cover over tabs on the top surface of frame. Rotate cover

downward onto the frame and turn key to lock.

Electronic warranty form at www.sti-usa.com/wc14

SURFACE MOUNT INSTALLATIONS

FOR ADDTIONAL CLEARANCE A SUB

SPACER KIT MUST BE ORDERED.

UB-901 2 in. (50mm) DEPTH

UB-905 1.25 in. (32mm) DEPTH

1 in.

(



VIEW A

91051 COVER

9105 FRAME

XISTING FLUSH

MOUNT THERMOSTAT

KEY (2) PROVIDED

PART OF COVER ASSEMBLY

19033 ANCHOR

(4) PROVIDED

9105 FRAME

CENTER FRAME OVER

EXISTING THERMOSTAT

MARK AND DRILL (4) 1/4 in.

(6.3mm) HOLES AND COMPLETE

ASSEMBLY AS SHOWN.

91051 COVER AND

LOCK ASSEMBLY

19013 SCREW

(4) PROVIDED

FRAME TABS

THE THREE (3) COVER

TABS MUST FACE UPWARD.

RILL (4) HOLES .25 in.

(6.3mm) DIAMETER

VIEW A

ABOVE



STI-9105 (CLEAR)

STI-9105-S (SMOKE)

1 in.

(25mm)



4.75 in.

(121mm)

4.95 in.

(126mm)

6.5 in.

(165mm)

8.15 in.

(207mm)

5.5 in.

(140mm)

3.15 in.

(80mm)

3.0 in.

(76mm)

1 2

Inhaltsverzeichnis

Seite 1 - INSTALLATION INSTRUCTIONS

Safety Technology International, Inc.2306 Airport Road • Waterford, Michigan 48327-1209Phone: 248-673-9898 • Fax: 248-673-1246Toll Free: 800-888-4784

Seite 2 - INSTALLATION:

INSTALLATION:1. DO NOT REMOVE THERMOSTAT. PRIOR TO DRILLING ANCHOR HOLES COVER THERMOSTAT WITH ACLOTH WETTED WITH WATER TO PREVENT DUST FROM PENETRAT

Verwandte Modelle: SUB-905 | SUB-901 |

Kommentare zu diesen Handbüchern

Keine Kommentare

Sti 9105 Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Sicherheit Sti 9105 herunter. STI 9105 User Manual Benutzerhandbuch

Inhaltsverzeichnis

Verwandte Modelle: SUB-905 | SUB-901 |

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Sicherheit Sti 9105